How to videos

Supreme Canopy Replacement

Supreme Canopy Replacement

Step 1: Remove Solar Panel

- Make sure the umbrella handle is at the bottom of the pole.

- Remove the solar panel that is on top of the umbrella.

Step 2: Loosen Canopy

- Remove the ribs from the canopy pockets.

- Slide the handle up approximately 10 inches.

Step 3: Open Canopy

- Using a drill or screwdriver, remove the screw from the main pole.

- Detach the Velcro strap to open the canopy.

Step 4: Remove Canopy

- Remove the canopy from the umbrella frame.

Step 5: Place Canopy

- Flip the canopy inside out and place your arm under the canopy.

- Locate the hole on top of the canopy and pass 2 fingers through it.

- Place your fingers on top of the umbrella. Ti

- Flip the canopy over the umbrella frame.

Step 6: Close Canopy

- Close the canopy opening using the Velcro straps.

- Using a drill or screwdriver, screw the canopy to the main pole.

Step 7: Secure Canopy

- Place each rib back into the canopy pockets.

- Place the solar panel on top of the umbrella.

Step 8: Test Umbrella

- Open and close the umbrella to make sure the canopy is properly installed.

Reading next

Grande Assembly Instructions
Market Umbrella Canopy Replacement